Basic Tools - Kenmore POWER MISER 153.33616 Owner's Manual

Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materials,
depending on your type of installation.
WATER HEATER tl__.l_<_ ,,,,_
IBSTA T,O. .......
KIT WITH FLEXIBLE _,;_, I
CONNECTORS i!¸_ _!: !
FOR 3/4" (10.05 ram)
OR 112" (12.7 ram)
THREADEDOR
COPPER PLUMBING
FLEXIBLE WATER HEATER GAS
CONNECTOR WITH FITTINGS
DRAIN PANS AVAILABLE IN 20" (508 mm)
DIAMETER FOR WATER HEATERS
HAVING A DIAMETER t8" (457 ram) OR
LESS, 24" (6t6mm) DIAMETER FOR
WATER HEATERS HAVING A DIAMETER
22" (559 mm) OR LESSAND AVAILABLE
IN 28" (7tl ram) DIAMETER FOR WATER
HEATERS HAVING A DIAMETER 26"
(660 mm) OR LESS
i_ J,_ N_ _T_ _r_ WATER HEATER HEAT
TRAPS HELP REDUCE
I I HEAT LOSS DUE TO
EXPANSION TANKS FOR THERMAL EXPANSION
CONDITIONS AVAILABLE IN 2 GALLONS
(7.6 LITERS) AND 6 GALLONS (t8.9 LITERS)
CAPACITY THROUGH LOCAL SEARS STORE OR
SERVICE CENTER
Basic Tools
You may or may not need all these tools, depending on your
type of installation. These tools can be purchased at your local
Sears Store.
Pipe Wrenches (2) 14" (356 mm) ;_
Screwdriver
Tin Snips
6' (1.82 m) Tape or Folding Ruler
Garden Hose
Drill
Pipe Dope or Teflon Tape DRILL
SLOT-HEAD SCREWDRIVER
PHILLIPS SCREWDRIVER
ROLL OF TEFLON
TAPE (USE ONLY OH
WATER HEATER
CONNECTIONS)
TIN SNIPS
PIPE DOPE
(SQUEEZE TUBE)
USE FOR WATER AND GAS
CONNECTIONS
GARDEN HOSE 6 FOOT TAPE PIPE WRENCH
Additional Tools Needed
When Sweat Soldering
Tubing Cutters or Hacksaw
Propane Tank
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
TUBING CUTTER
PROPANE
TORCH
HACKSAW
ROLL OF
EMERY CLOTH
3/4" (19 mm) WIRE BRUSH
t/2" (t3 mm) WINE BRUSH
ROLL OF LEAD-FREE
SOFT SOLDER
SOLDER
FLUX