KVH Industries TracVision TV6 Installation Manual page 22

11 Continued
DISH Network and Bell TV Wiring
Follow these steps to connect DISH Network or
Bell TV receivers to the TracVision system
(circular LNB required).
IMPORTANT!
Receivers must be DISH Pro-compatible. Look
for the DISH Pro logo on the box.
Connecting 1 Receiver
Connect an RF cable from the "Receiver" jack on
the TV-Hub to the "Satellite In" jack on the
receiver (see Figure 32).
Connecting 2 or More Receivers
a. Connect an RF cable from the "Receiver" jack
on the TV-Hub to the "Antenna" jack on the
DC block splitter (supplied in the kit).
b. Connect the "Primary" jack on the DC block
splitter to the "Satellite In" jack on the first
receiver. This receiver will be able to control
satellite selection in Automatic satellite switching
mode.
c. If you need to connect just a second receiver,
connect the "Secondary" jack on the splitter
to the "Satellite In" jack on the second
receiver (see Figure 33).
If you need to connect three or more
receivers, connect the "Secondary" jack on
the splitter to the "18V" port on a multiswitch
(see Figure 34). KVH offers a 4-output
passive multiswitch (KVH part no. 72-0676)
and an 8-output active multiswitch (KVH
part no. 72-0677).
d. When using a multiswitch, connect the
multiswitch outputs to the "Satellite In" jacks
on the receivers.
IMPORTANT!
To enable any of the additional receivers to
control satellite selection in Automatic
satellite switching mode, install an optional IP
Autoswitch (KVH part no. 72-0634) in-line
with its RF input. See Appendix A on
for details.
Wire the Receivers
Figure 32: Wiring 1 DISH/Bell Receiver
TV-Hub
Figure 33: Wiring 2 DISH/Bell Receivers
TV-Hub
Antenna
Secondary
Figure 34: Wiring 3+ DISH/Bell Receivers
TV-Hub
Antenna
Secondary
18V
18V
Multiswitch
page 33
Connect up to 4 receivers
RF1
Receiver
Antenna
Satellite In
AC Power
Receiver
Satellite In
DC Block
Splitter
Primary
Satellite In
Receiver
DC Block
Splitter
Satellite In
Primary
13V
Terminate
unused
outputs
Satellite In
Receiver
Receiver
AC Power
Receiver
AC Power
Receiver
AC Power
Receiver
AC Power
21