Network Settings
DIGITAL LINK mode
You can switch the setting of DIGITAL LINK/LAN terminal.
LAN: Enables LAN communication via the Display's LAN terminal.
Auto (LAN): Enables automatic selection between LAN communication via the Display's LAN terminal and HDMI/
LAN communication via the twisted pair cable transmitter.
DIGITAL LINK (LAN): Enables HDMI/LAN communication via the twisted pair cable transmitter.
DIGITAL LINK (RS-232C): Enables HDMI/RS-232C communication via the twisted pair cable transmitter.
•
To use the control methods shown in pages 22 to 34, select "LAN", "Auto (LAN)" or "DIGITAL LINK (LAN)".
•
Power consumption during standby is slightly larger if you set to any other setting than "LAN".
Extron XTP
To carry out connection settings with XTP Transmitter made by Extron. Visit the following website for details.
http://www.extron.com
Reset
You can reset the network setting to the factory default of the Display.
1
Select [Reset] in [Network Settings] menu and press
Network Settings
Yes
2
Select [Yes] and press
It takes some time to restart network while the network settings are initialized.
During that time, "Network Settings" in the "Setup" menu is grayed out and cannot be set.
22
Reset
No
.
button.