Example Of Network Connection (Digital Link) - Panasonic TH-80OLFB70U Operating Instructions Manual

Connection

Example of Network Connection (DIGITAL LINK)

A twisted pair cable transmitter such as the Panasonic Digital Interface Box (ET-YFB100G) uses twisted pair cables
to transmit inputted video and audio signals, and these digital signals can be input to the Display via the DIGITAL
LINK terminal.
Network connections via DIGITAL LINK terminal
PC
(commercial)
Confi gure the settings in "Network Settings when using a DIGITAL LINK connection. (see pages 20 to 22)
Precautions for use while connecting with a twisted pair cable transmitter
Installing / Connecting g
Ask the dealer or a qualifi ed technician to carry out the cable wiring work for DIGITAL LINK connections.
●
Insuffi cient wiring work may cause the inability to apply the cable transmission characteristics and cropped
or fuzzy images and sounds.
The transmission distance between the twisted pair cable transmitter and the device is up to 100 meters.
●
Exceeding this distance can cause cropped images or sounds, as well as LAN communication errors.
Do not use a hub between the twisted pair cable transmitter and the Display.
●
When connecting to the Display using the twisted pair cable transmitter (receiver) of other maker, do not
●
use another twisted pair cable transmitter between the twisted pair cable transmitter of other maker and
this device. The images and sounds may be interrupted or become unstable.
If possible, lay the cable so that it is extended and not coiled in order to minimize both external and internal noise.
●
Lay out cables of the twist pair cable transmitter and this product away from other cables, especially from
●
the power supply cable.
When laying multiple cables, keep them as close together as possible running parallelly and not bundled.
●
After laying the cable(s), make sure that the signal quality in "DIGITAL LINK status" is -12 dB or below.
●
Twisted pair cables p
Use a LAN cable between the twisted pair cable transmitter and the device that conforms to the following
●
conditions.
It meets or exceeds CAT5e standards
●
It is a shielded cable (with a connector)
●
When laying the cable(s), use an instrument such as a cable tester or cable analyzer and check whether the cable
●
characteristics are CAT5e or above. When using a relay connector along the path, also include this in the measurements.
Do not pull cables hard. Also avoid forcefully bending or folding them.
●
Other
This device is compatible with our Digital Interface Box (ET-YFB100G). For the twisted pair cable transmitter
●
of the other maker, see the website: http://panasonic.net/prodisplays/support/digitallink.html
DIGITAL LINK terminal
(not supp
LAN cable L LAN cable
(commercial)
Hub or broadband router
g
Display (rear surface of the main body)
LAN ca cable
upplied)
When a Panasonic ET-YFB100G is used
It is a straight cable
●
It is a solid cable
●
11