Wearing Your Tweak - tweak Basic Instruction Manual

Inserting a Battery
Gently close the battery door. It should close easily; do not force
3
the door closed.
(FIGURE 5)
If resistance is experienced while closing the battery door, make sure the
battery is inserted properly. When the battery door is completely closed,
your Tweak is ready for operation.
ON –When the battery door is
completely closed, your
Tweak is on.
OFF –To turn off your Tweak,
open the battery door part way.
10 Inserting a Battery
(continued)
FIGURE 5

Wearing Your Tweak

Place the Tweak over your ear. Grab the loose end of the tubing
and gently insert the tip into the ear canal. Position the retaining lock in
the bowl of the ear.
(FIGURE 6)
When properly inserted, the tubing will lay close to the head around the
front of the ear and into the canal. You can check this by moving your
fi nger down the tubing, into the ear.
Using a mirror at fi rst may be helpful
to properly position Tweak.
If the tip doesn't stay in your ear,
you may need a different length thin
tube. Additional sizes are available
at TweakHearing.com or by calling
1-888-815-3240.
FIGURE 6
Wearing Your Tweak 11