Service - Zanussi ZTAB 250 User Manual

– clean the filter after each drying cycle;

Service

In the event of technical faults, please first
check whether you can remedy the problem
yourself with the help of the operating instruc-
tions (Chapter "What to do if...").
If you were not able to remedy the problem
yourself, please contact your local service cen-
tre.
In order to be able to assist you quickly, we re-
quire the following information:
– Model description
– Product number (PNC)
– Serial number (S No.) (for numbers, see rating
plate)
– Type of fault
Model description:
PNC:
S No.:
www.zanussi.com
– spin the laundry well before drying.
– Any error messages displayed by the appli-
ance
So that you have the necessary reference num-
bers from your appliance at hand,
we recommend that you write them in here:
.................................................................................
.................................................................................
.................................................................................
13