Environment - Zanussi ZTAB 250 User Manual

Exhaust dryer
Table of Contents

Advertisement

Available languages

Available languages

exterior wall or ceiling, it must be ensured an ex-
haust capacity of at least 150 m3/h. If the dryer
is fitted next to kitchen units, make sure that the
vent hose is not squashed. If the hose is partial-
ly squashed, drying efficiency will be reduced,
resulting in longer drying times and higher ener-
gy consumption. If the hose is completely
squashed, the safety cut-outs with which the
machine is fitted may operate. When operating
the tumble dryer, the room temperature must
not be lower than +5°C and higher than +35°C,
as it may affect the performance of the appli-
ance.
Electrical connection
Details on mains voltage, type of current and the
fuses required should be taken from the type
plate. The type plate is fitted near the loading
aperture (see "Product description" chapter).
Connect the machine to an earthed sock-
et, in accordance with current wiring regu-
lations.
Warning! The manufacturer declines
any responsibility for damage or
injury through failure to comply with the
above safety precautions.
Should the appliance power supply cable
need to be replaced, this must be carried
out by our Service Centre

Environment

Recycle the materials with the symbol
the packaging in applicable containers to
recycle it.
Help protect the environment and human health
and to recycle waste of electrical and electronic
appliances. Do not dispose appliances marked
with the symbol with the household waste.
Return the product to your local recycling facility
or contact your municipal office.
Packaging material
The packaging materials are environmentally
friendly and can be recycled. The plastic com-
ponents are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging
materials in the appropriate container at the
community waste disposal facilities.
12
Warning! Make sure not to cause
damage to the mains plug and to the
mains cable.
Connect the mains plug to the mains
socket only at the end of the installation.
Make sure that there is access to the
mains plug after the installation.
Door reversal
To make it easier to load or unload the laundry,
the door can be reversed. The door must only
be reversed by an authorised service engineer.
Please contact your local Service Force Centre.
The engineer will carry out the door reversal at
your cost.
Special accessories
Stacking kit
A special stacking kit is
available through your
dealer, to enable the
mounting of the dyer on
top of a front loading
washing machine with
cover's depth between
48 and 60 cm. Read
carefully the instruc-
tions supplied with the kit.
Warning! When disposing of old
. Put
appliances, remove the mains cable and
dispose of together with the plug. Remove the
door hook and ensure it is no longer lockable to
prevent young children being trapped inside.
Environmental tips
• In the dryer, laundry becomes fluffy and soft.
Fabric softeners are not therefore needed
when washing.
• Your dryer will function most economically if
you:
– always keep the ventilation slots on the
base of the dryer unobstructed;
– use the loading volumes specified in the
programme overview;
www.zanussi.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents