Graphic Subsystem; Adjusting The Display Brightness - Gericom Phantom Series Superlight L41ii8 Getting To Know Manual

lighter the touch, the better the response. Heavy touch does not
produce better response.

Graphic Subsystem

Your computer uses a high performance 14.1-inch active matrix TFT
panel with high resolution and multi-million colors for comfortable
viewing. The ATI Radeon Xpress integrated video graphics
accelerator, which is Microsoft DirectX 9 compatible, performs
graphic rendering at a lighting-fast speed.

Adjusting the Display Brightness

The notebook uses special key combinations, called hot keys, to
control brightness.
Press Fn+F7 to increase the brightness.
Press Fn+F8 to decrease the brightness.
Note:
To maximize your battery operating time, set the brightness to the lowest
comfortable setting, so that the internal backlight uses less power.
Extending the Life of the TFT Display Device
Observe the following guidelines to maximize the life of the
backlight in the display.
1. Set the brightness to the lowest comfortable setting (Fn+F8).
2. When working at your desk, connect your notebook to an
external monitor and disable the internal display Fn+ F4.
3. Do not disable the suspend time-outs.
4. If you are using AC power and have no external monitor
attached, change to suspend mode when not in use.
Opening and Closing the Display Panel
To open the display, push the LCD latch to the right and lift up
the lid. Then tilt it to a comfortable viewing position.
To close the display cover, fold it down gently.
Warning:
place any object on top of the computer when the display is closed
To avoid damaging the display, do not slam it when closing. Do not