Download  Print this page

Kenmore 625.38556 Owner's Manual page 24

Premier reverse osmosis drinking water
Hide thumbs

Advertisement

Cause:
The level of chlorine
in your water
Correction:
If the water
supply
contains
more than
2.0 ppm of chlorine,
supply
exceeds
maximum
limits, and
additional
filtering
of the water
supply
to the Reverse Osmosis
is
has destroyed
the Reverse Osmosis
needed.
Correct
this condition
before
doing
maintenance
on the
membrane.
Reverse Osmosis
system.
Cause:
The prefilter
is no longer
reducing
Correction:
Replace
the prefilter,
postfilter
and Reverse Osmosis
membrane
chlorine
from the water
supply,
cartridges.
See page
20.
Cause:
Postfilter
expended.
Correction:
Replace
the post filter
cartridge.
If taste and odor
persists,
replace
the prefilter
cartridge
and Reverse Osmosis
membrane
Reverse Osmosis
membrane
cartridge
cartridge.
See page 20.
expended.
Cause:
Contamination
in product
water
Correction:
Use sanitizing
procedures.
Replace
pre and post filter
cartridge.
storage
tank.
See pages
16 & 20.
Cause:
System contamination.
Correction:
Sanitize
entire
system.
Call 1-800-426-9345
for instructions.
Cause:
Water
supply
to the Reverse Osmosis
Correction:
Increase
water
pressure,
precondition
the water,
etc., as needed
system
not within
specifications,
to conform
before
doing
maintenance
on the Reverse Osmosis
system.
Cause:
Prefilter
or Reverse Osmosis
membrane
Correction:
Replace
the prefilter
cartridge.
If rate does not increase,
replace
cartridges
plugged
with
sediments,
the postfilter
cartridge
and Reverse Osmosis
membrane
cartridge.
See page
20.
Cause:
Storage
tank air-charge
less than
I Correction:
Open
Reverse Osmosis
faucet
and drain
tank until flow
slows to a
5-7 psi.
drip.
Keep faucet
open and check
tank
pressure.
If low, pressurize
I
to 6 psi. Close faucet
to refill the tank.
_
_
in _rO_',
_
_ __ _ _ __ _ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ __ _ _ _ __ _ _ _....
Cause:
Water
supply
to the Reverse Osmosis
Correction:
Increase
water
pressure,
precondition
the water,
etc., as needed
system
not within
specifications,
to conform
before
doing
maintenance
on the Reverse Osmosis
system.
Correction:
Send treated
and untreated
water
samples
to a water
analysis
lab for testing.
It is important
to test both the treated
and
untreated
water
to determine
system performance.
If the TDS is
not within
the system's
performance
guidelines,
replace
the pre-
filter,
post filter
and RO membrane
cartridges.
Cause:
Missing
flow
control
insert in red drain
I Correction:
Replace
flow
control
insert. See page 21.
tube or its corresponding
port.
1
Questions?
Call The Kenmore
Water
Line 1-800-426-9345
or visit KenmoreWater.com
24

Advertisement

loading

  Also See for Kenmore 625.38556

  Related Manuals for Kenmore 625.38556

This manual is also suitable for:

Elite 625.385560