Download Print this page
Johnson Controls 33” Multi-position Gas Furnaces User's Information Manual

Johnson Controls 33” Multi-position Gas Furnaces User's Information Manual

33” multi-position gas furnaces (manufactured housing or modular home applications)

Advertisement

Quick Links

USER'S INFORMATION
MANUAL
MODELS:
33" Multi-position Gas Furnaces
(Manufactured Housing or Modular Home Applications)
SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
FURNACE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
START-UP AND SHUTDOWN INSTRUCTIONS . . . . . . . . . . . . . . . . 2
HOW YOUR GAS FURNACE WORKS . . . . . . . . . . . . . . . . . . . . . . 3
OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
TO TURN OFF THE APPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . 3
FURNACE MAINTENANCE - USER INFORMATION . . . . . . . . . . . . 4
EXTERNAL AIR FILTERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
How to Clean your Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
CONTACT INFORMATION FOR USA
• Contact us by mail:
DISTRIBUTED BY:
StyleCrest
801 W. 37th Street
Building #7
Wichita, Ks 67219
We recommend that the user read all sections of this
manual and keep the manual for future reference.
FIRE OR EXPLOSION HAZARD - Failure to follow safety warnings
exactly could result in serious injury, death, or property damage.
- Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone (includ-
ing cell phone) in your building.
Leave the building immediately.
Immediately call your gas supplier from a neighbor's phone. Fol-
low the gas supplier's instructions.
If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
SECTION I: SAFETY
This is a safety alert symbol. When you see this symbol on
labels or in manuals, be alert to the potential for personal
injury.
Understand and pay particular attention to the signal words DANGER,
WARNING, or CAUTION.
DANGER indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.

TABLE OF CONTENTS

• Manufacturer:
Johnson Controls Unitary Products
Air Duct System And Plenum . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
BLOWER CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
MOTOR LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SERVICE INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
TROUBLESHOOTING PROBLEMS . . . . . . . . . . . . . . . . . . . . . . . . .5
FURNACE CONTROL DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . .5
REPLACEMENT PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
WIRING DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
CONTACT INFORMATION FOR CANADA
• Go to website at www.york.com click on "contact", then click on
"contact form" and follow the instructions.
• Contact us by mail:
Johnson Controls Unitary Products
Consumer Relations
5005 York Drive
Norman, OK 73069
WARNING indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation, which, if not
avoided may result in minor or moderate injury. It is also used to
alert against unsafe practices and hazards involving only property dam-
age.
1.
The furnace area must be kept clear and free of combustible mate-
rials, gasoline and other flammable vapors and liquids.
2.
Insulating materials may be combustible. The furnace must be
kept free and clear of insulating materials. The furnace area must
be examined when installed in an attic or other insulated space or
when insulation is added to be sure that the insulation material has
been kept away from the furnace.
3.
The furnace needs air for combustion in order to operate properly
and safely. Do not block or obstruct air openings on the furnace,
air openings to the area where the furnace is installed, or spaces
around the furnace.
4.
Follow the instructions exactly as shown on the OPERATING
INSTRUCTION LABEL on the furnace or the "START-UP AND
SHUTDOWN INSTRUCTIONS" section of this manual when light-
ing the furnace or turning the furnace off.
5.
Should the gas supply fail to shut off or if overheating occurs, shut
off the gas valve to the furnace before shutting off the electrical
supply.
6.
Do not use this furnace if any part has been under water. A flood-
damaged furnace is extremely dangerous. Attempts to use the fur-
nace can result in fire or explosion. A qualified service agency
should be contacted to inspect the furnace and replace all gas
controls, control system parts, electrical parts that have been wet
or the furnace if deemed necessary.
420706-UUM-C-0112

Advertisement

loading

Summary of Contents for Johnson Controls 33” Multi-position Gas Furnaces

  • Page 1: Table Of Contents

    • Manufacturer: • Go to website at www.york.com click on “contact”, then click on DISTRIBUTED BY: “contact form” and follow the instructions. Johnson Controls Unitary Products StyleCrest • Contact us by mail: 801 W. 37th Street Johnson Controls Unitary Products...
  • Page 2: Safety

    Examine the vent pipe making sure it is firmly in place, that it slopes slightly upward and is physically sound without holes and all of the connections are secure. Johnson Controls Unitary Products...
  • Page 3: How Your Gas Furnace Works

    Shut-off Manual Ground To Gas Valve Shut-off Union Supply To Gas Valve Supply Ground Union Valve Ground Pipe Union Drip Drip Ground Union Valve Drip Drip Pipe Upflow Downflow Configuration Configuration FIGURE 4: Upflow/Downflow Gas Piping Johnson Controls Unitary Products...
  • Page 4: Furnace Maintenance - User Information

    As a safety precaution, all electrical power and the gas supply to the furnace should be turned off before servicing. Johnson Controls Unitary Products...
  • Page 5: Motor Lubrication

    1/4 second and “off” for 1/4 second. This pattern will be repeated the number of times equal to the code. For example, six “on” flashes equals a number 6 fault code. All flash code sequences are broken by a 2 sec- ond “off” period. Johnson Controls Unitary Products...
  • Page 6: Limited Warranty

    Unitary Products Group (UPG) Customer Relations Department, PO Box 19014, Wichita, KS 67204-9014. Subject to change without notice. Published in U.S.A. 420706-UUM-C-0112 Copyright © 2012 by Johnson Controls, Inc. All rights reserved. Supersedes: 420706-UUM-B-1211 Johnson Controls Unitary Products...

This manual is also suitable for:

Mg9s