Global Setup Menu; Entering Text On You Phone - Uniden DECT 1535 Series Owner's Manual

The settings on this menu affect all handsets. Only one handset at a

Global Setup Menu

time can change these menu options.
Set Line Mode
Insert 0
Edit Voice Mail
VMWI Reset
Use the 12-key dial pad when you want to enter text into your phone
Entering Text on Your Phone
(a name in the phonebook, the handset banner, etc.).
x The phone defaults to a capital letter for the first letter and any
letter after a space; otherwise, it uses small letters.
x To switch to all capital letters, press
capital letters first (e. g. ABCabc2) until you enter a blank space or
press again. (Any time you want to change case, just press
x If two letters in a row use the same number key, enter the first letter
*
and wait a few seconds (or press
next space. Enter the next letter.
x Press to enter a blank space.
x To change a letter, move the cursor to that letter and press
#
erase the letter. Then, enter the new one.
x To erase the entire entry, press and hold
x Press to cycle through all available symbols and punctuation.
0
12
Do not change this setting unless instructed to by
customer service.
This feature adds "0" or "00" at the beginning of
the number received from Caller ID. The default
setting for New Zealand is ON. The default setting
for Australia is OFF.
If you subscribe to a Voice Mail service you can set
the Voice Mail number (see page 20).
Reset your Visual Message Waiting Indicator to
bring it back in sync with your voice mail service.
. The phone defaults to all
*
); the cursor will move to the
RighT
.
ClEAR
.)
*
to
ClEAR