Uniden DECT 1535 Series Owner's Manual page 9

Key (icon)
TAlk/FlAsh
END
mENU/sElECT
Up ( )
DowN ( )
phoNEbook/
lEFT ( )
CAllER iD/
RighT ( )
REDiAl/
pAUsE
mEssAgEs/
mUTE ( )
kEypAD loCk
( )
spEAkER ( )
LED
sTATUs
What it does
- In standby: start a telephone call (get a dial tone).
- During a call: switch to a waiting call.
- During a call: hang up.
- In the menu or any list: exit and go to standby.
- In standby: open the menu.
- In the menu or any list: select the highlighted item.
- In standby: increase the ringer volume.
- During a call: increase the audio volume.
- In any menu or list: move the cursor up one line.
- In standby: decrease the ringer volume.
- During a call: decrease the audio volume.
- In any menu or list: move the cursor down one line.
- In standby or during a call: open the phonebook.
- In the menu: go back to the previous screen.
- During text entry: move the cursor to the left.
- In standby or during a call: open the Caller ID list.
- During text entry: move the cursor to the right.
- In standby: open the redial list.
- While entering a phone number: insert a 2-second
pause.
- In standby: access your answering system.
- During a call: mute the microphone.
- If the phone is ringing: mute the ringer for this call
only. Applies to individual handset ringer only.
- In standby: press and hold to lock or unlock the
keypad.
- Switch a normal call to the speakerphone (& back).
What it means
- On: the battery is charging.
- Blinking: there are new messages.
9