Samsung SNB-6003 User Manual page 103

SSL
You can select a secure connection system or install the public certificate for this purpose.
1. From the Setup menu, select the
<Network ( )> tab.
2. Click <SSL>.
3. Select a secure connection system.
If you want to use HTTPS mode for camera
`
access, you need to enter the camera IP
address as https://<Camera_IP>:HTTPS.
If you failed to configure the Web viewer
settings in HTTPS mode with Internet Explorer,
edit the Internet options as follows: <Menu 
Tools  Internet Options  Advanced  Security  Uncheck TLS 1.0, and check TLS 1.1, TLS 1.2>
4. Search for the public certificate that you want to install on the camera.
To install the certificate on the camera, you need to provide a certificate name (it
can be arbitrarily assigned by the user), certificate file issued from the certification
authority and a key file.
The <HTTPS (Secure connection mode using the public certificate)> item will be active only if
`
there exists a public certificate installed.
5. When done, click [Apply (
Installing the certificate
1. Enter the certificate name.
2. Select the certificate file to be installed and certificate key, and click [Install (
button.
Deleting the certificate
1. Click [Delete (
2. To delete a public certificate, you should access the network video decoder in
the mode of <HTTP (Do not use secure connection)> or <HTTPS (Secure
connection mode using a unique certificate)>.
)].
)] button.
)]
English _103