Samsung SNB-6003 User Manual page 16

overview
Item
e
Power Port
f
Network Port
g
Alarm I/O Port
h
Test Monitor Out
i
SD, Power Indicators
J RS-485 port only supports direct connection with pan/tilt driver and external connections of the
`
RS-485 controller is not supported.
16_ overview
Used to plug the power cable.
Used to connect the PoE or Ethernet cable for network connection.
Used to connect the alarm input sensor or external day/
ALARM IN
night sensor.
ALARM OUT Used to connect the alarm output signal.
GND Used for earth-grounding.
RS-485+ RS-485 Data line
RS-485- RS-485 Data line
Output port for test monitoring the video output. Use the test monitor cable
to connect to a mobile display and check the test video.
ON : A memory card is inserted and operates normally.
Flashing : Failed to record, insufficient space, or inserted
SD
OFF : Camera is off, camera is restarting, memory card is
not in place, or when record is off.
ON : While the power is on
POWER
OFF : If the power is off
Description
abnormally.