Connectors And Jumper Definition - SOYO SY-P4VM800 Quick Start Manual

2.7 Connectors and Jumper Definition

CPU Cooling
FanCPU_FAN1
Pin1 Pin2 Pin3
GND +12V Sensor
Pin1 Pin2 Pin3
AUD_MIC AUD_GND AUD_MIC_BIAS
Pin1
VERG_FP_USBPWR0 VERG_FP_USBPWR0
Pin6
USB_FP_P1+ GROUND
Pin1 Pin2
NC KEY
HDD LED
Pin9 Pin10
LED Anode LED Cathode
Connect your power switch to this header (momentary switch type).
To turn off the system, press this switch and hold down for longer than 4 seconds.
Attach the ATX 12V Power cable to the connector. (This motherboard requires an ATX 12V power supply,
an AT or ATX power supply can NOT be used.)
When using the Power-On by Keyboard function, please ensure the ATX power supply is able to provide
at least 720mA on the 5V Standby lead (5VSB).
SOYO SY-P4VM800 Quick Start Guide
System Cooling Fan
CHA_FAN1
Pin1 Pin2 Pin3
GND +12V Sensor CD IN L
AUDIO1:Front Panel Audio Connector
Pin4 Pin5
AUD_VCC AUD_FPOUT_R AUD_RET_R
USB2 / USB3: Front Panel USB Connector
Pin2 Pin3
USB_FP_P0-
Pin7 Pin8
GROUND
IR1: Infrared Port
Pin3
Vcc5
Pin11
VCC
Pin17
VCC
PWRBT
Pin4
Power On/Off
Power On/Off: PWRBT
ATX 12V Power Supply: ATX PW
16
CD1
Pin1 Pin2
GND
Pin6 Pin7 Pin8 Pin9
HP_ON KEY AUD_FPOUT_L
Pin4
USB_FP_P1-
Pin9
KEY
Pin4 Pin5
GND IRTX
Power LED
Pin12
NC
Speaker
Pin18 Pin19
NC NC
RESET
Pin5 Pin1
GND Control PIN
Pin3 Pin4
GND CD IN R
Pin10
AUD_RET_L
Pin5
USB_FP_P0+
Pin10
USB_FP_OC0
Pin6
IRRX
Pin13
GND
Pin20
Speaker out
Pin2
GND