Memory Configurations; Connectors And Jumper Settings; Default I/O Settings - SOYO 6KB User's Manual & Technical Reference

Memory Configurations

DIMM1
RAM Type
Size
Note: This mainboard requires 3.3V DIMM with an access time of 70ns
or less, it supports memory size from 8 to 512MB and you may use
any combination of DIMMs in the banks.

Connectors and Jumper Settings

CMOS clear: JP5
Retain CMOS 1-2
data (default)
Clear CMOS data 2-3
USB1 and 2
Connect your USB devices to these headers
ATX Power Supply On/Off Switch: PWRBT
Connect your power switch to this jumper (momentary switct type).
IrDA (Infrared Devices Connector: IR
pin 1 2
function Vcc FIRRX

Default I/O Settings

PORT
LPT1
COM1
COM2
Note: If the default I/O settings conflict with those of other I/O cards,
such as soundcards you will have to adjust the settings of one of
them. The default settings for the onboard I/O can be changed in
the BIOS setup. Enter BIOS Setup by pressing <Delete> key
during boot-up. The I/O settings can be found under ÒIntegrated
PeripheralsÓ.
DIMM BANKS
DIMM2
EDO/SDRAM
8/16/32/64/128
ATX Power Supply: JP1
please insert the ATX power supply
plug into this header.
Wake on LAN jumper: JP44
Please connect the WOL cable from
your LAN card to this jumper.
PRT
printer cable header
3 4
IRRX GND
I/O Address
378H
3F8H
2F8H
DIMM3 DIMM4
CPU Cooling Fan: FAN
pin
function
RST
Connect the reset
button to this
jumper.
SPK
Connect the cable
of speakers to
this jumper
TB Led
5 Connect your
IRTX Turbo led to this
jumper.
IRQ Functionality
7 ECP + EPP
4
3
1 2 3
GND 12V NC
IDE Led
Connect the HDD
led to this jumper.
Keylock
Connect keyboard
lock switch to this
jumper
PW Led
Connect the
power led to this
jumper.
Ð
Ð