17
Control Panel and Upper FireboxSupports
Standcart upright.
In front, fit control panel betweenleft and rightlegs. Insert#10-24x2"screws to hold panelin place. Placeupperfirebox
supportsontoscrews makingsure angleside is facing thefront and attachwith #10-24flange nuts,
In back,attachupperfireboxsupportwith #10-24x2" screws and#10-24flange nuts,
17
ControlPanel
,,,_
\
#10-24x2"Screw
Qty.8
UpperFirebox
Support
27
#10-24X1/2" Screw
Qty.2
13
#10-24FlangeNut
Qty.8
Valve/Hose/Regulatorand Electronic ignitionModule
Attachvalve/hose/regulator assemblyto controlpanelwith #10-24x1/2"screws (A).
Removeignitorcapand plastichexnutfrom ElectronicIgnitionmoduleassembly.Insertmoduleintotheopeningon controlpanel
and attachwith the removedhexnut. PlaceAA batteryintomoduleslot with positiveend (+)facing outward.Screwignitorcap onto
module(B).
Ignitor Cap
27
+
Valve/Hose/Regulator
1_
!_
Electronic Ignition Module
\
16,464810408