Download
Share
Print this page
Stanley TRE550 Owner's Manual
  1. Manuals
  2. Brands
  3. Stanley Manuals
  4. Nail Gun
  5. TRE550
  6. Owner's manual

Stanley TRE550 Owner's Manual

Heavy duty electric staple/nail gun
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

HOW TO USE YOUR ELECTRIC STAPLER/NAILER
TO LOAD STAPLES
1. Unplug tool, (fig. 1)...(place on/off switch in "off" position, (fig. 2).)
2. Place on/off switch in "off' position.
3. Select proper staple length.
4. Use only staples identified by stock numbers on next page. Substitute staples may
cause jamming.
5. Hold tool upside down. (Squeeze latch and pull, (fig.3).)
6. Drop staples in channel, legs facing upward. Push latch back in to lock in place, (fig.
4).

Advertisement

loading

Related Manuals for Stanley TRE550

Summary of Contents for Stanley TRE550

  • Page 1 HOW TO USE YOUR ELECTRIC STAPLER/NAILER TO LOAD STAPLES 1. Unplug tool, (fig. 1)…(place on/off switch in "off" position, (fig. 2).) 2. Place on/off switch in "off' position. 3. Select proper staple length. 4. Use only staples identified by stock numbers on next page. Substitute staples may cause jamming.

  • Page 2: To Load Brads

    TO LOAD BRADS 1. Unplug tool, (fig. 1)…(place on/off switch in "off" position, (fig. 2).) 2. Use only brads identified by stock numbers on next page. Substitute brads will cause jamming. 3. Look for the image of a brad nail on the front side of the tool (fig. 5). Load brads into this side only.
  • Page 3 Personal Safety 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

  • Page 4: Symbols

    To Clear a Jammed Staple/Brad Nail STAPLE This tool should not jam if kept clean and the correct Stanley® staples/brad nails are used. If a jam should occur, unplug the tool and unload any remaining staples/brad nails. Reload with new staples/brad nails.

  • Page 5: Use Of Extension Cords

    Flush Stapling/Nailing: This stapling tacker will fit flush against perpendicular surfaces-such as the junction of a wall and the ceiling. The angled drive coil allows stapling/nailing within 1/8” of such surfaces. Easy Loading: The sliding base allows for easy loading and unloading of staples/brad nails by simply squeezing the latch and pulling.