Replacing The License Plate Light Bulb; Auxiliary Light - Yamaha YZF R1 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1
2
1. License plate light unit
2. Screw
2. Remove the license plate light bulb
7
socket (together with the bulb) by
pulling it out.
EAU24313
1. License plate light bulb
2. License plate light bulb socket
3. Remove the burnt-out bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.

Auxiliary light

2
1
1. Auxiliary light
This model is equipped with an LED-
type auxiliary light.
If the auxiliary light does not come on,
have a Yamaha dealer check it.
7-38
EAU44940
1