Door Alignment - Kenmore 795.78302.800 Service Manual

2. Insert gasket into channel
1) Snap gasket assembly into the door bracket.
Inserting the Gasket Assembly into the Bracket Door.
Incorrect
2) Press gasket into channel on the three remaining
sides of door.
3. Replace door frame cover
Starting at top of cover and working down, snap the cover
back into door.
Correct
Figure 6
Figure 7
Figure 8

3-2 DOOR ALIGNMENT

If the space between your doors is uneven, follow the
instructions below to align the doors:
1. With one hand, lift up the door you want to raise near
the middle hinge.
2. With other hand, use pliers to insert snap ring at the
middle hinge as shown.
3. Insert additional snap rings until the doors are aligned.
(Three snap rings are provided with the product.)
- 7 -
Figure 9