Standards Conformance; Disposal Of The Device - Snom 370 Quick Start Manual

E
N
snom 370 Quick Start Guide
G
L
• Do not install the device in rooms with high humidity (for example, in bathrooms,
I
laundry rooms, damp basements). Do not immerse the device in water and do not
S
spill or pour liquids of any kind onto or into the device.
H
• Do not install the device in surroundings at risk for explosions (paint shops, for
example). Do not use the device if you smell gas or other potentially explosive fumes.
• Do not use the device during thunderstorms. Lightning striking the power grid may
cause electric shocks.
• Warning: The handset contains a magnet, and its earpiece may attract small
dangerous objects such as needles or pins. Please ensure before each use that no
such objects are present.
SELV (Safety Extra Low Voltage) Compliance
Safety status of Input/Output connections comply with SELV requirements.
Warning: To avoid electric shock, do not connect safety extra-low voltage (SELV)
circuits to telephone-network voltage (TNV) circuits. LAN ports contain SELV
circuits, and PSTN ports contain TNV circuits. Some LAN and PSTN ports both use
RJ-45 (8P8C) connectors. Use caution when connecting cables.

Standards conformance

This device is CE and FCC-certified and meets European and US health, safety, and
environmental standards.
Unauthorized opening, changing, or modifying the device will cause the warranty to lapse and
may also result in the lapse of the CE and FCC certifications. In case of malfunction contact
authorized service personnel, your seller, or snom.
• IEC 60950-1:2001
Safety:
•
Power consumption:
• 5 V DC
Power:
•
1 x LAN, 1 x PC:
• 2 x IEEE 802.3 10/100 Mbps switch
Ethernet:
•
Power over Ethernet:

Disposal of the device

This device is subject to European Directive 2002/96/EC and may not be disposed of
with general household garbage.
If you do not know where you may dispose of the device at the end of its lifespan, contact
your municipality, your local waste management provider, or your seller.
Cleaning
To clean the device, use an anti-static cloth. Please avoid cleaning liquids as they might
damage the surface or internal electronics of the device.
8
2.8 – 2.9 watts
RJ45 (Ethernet)
IEEE 802.3af, Class 1
FCC Class B, CE Mark
Certifications: