Lincoln Electric PRO-CUT 55 Service Manual page 72
For use with machine code numbers 10473, 10474
Hide thumbs
Also See for PRO-CUT 55:
- Technical specifications (4 pages) ,
- Service manual (121 pages) ,
- Operator's manual (40 pages)
Table of Contents
Advertisement
F-34
CONTROL BOARD LED DEFINITIONS
LED1: (Red) This light indicates that 18 VAC is
being supplied to the control board from the
auxiliary transformer. It also shows that the 18
VAC is being rectified and should be regulated to
+15 VDC. This +15 VDC supply is used to power
the circuitry on the control board.
LED2: (Red) This light indicates that the +5.5
VDC is present. This voltage is derived from the
+15 VDC supply. The +5.5 VDC supply is used
to power the circuitry on the control board.
LED3: (Red) This light indicates that 18 VAC is
being supplied to the control board from the
auxiliary transformer. It also shows that the 18
VAC is being rectified and should be regulated to
-15 VDC. This -15 VDC supply is used to power
the circuitry on the control board.
TROUBLESHOOTING & REPAIR
TRIGGER CIRCUIT TEST (continued)
FIGURE F.11 - CONTROL BOARD LEDs
PRO-CUT 55 CONTROL G3328
LED2
LED1
LED3
F-34
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
