Storing Name Tags - GMC 2010 Yukon XL Denali Owner's Manual

Listing All Paired and Connected Phones
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say List . The system lists all the paired Bluetooth
devices. If a phone is connected to the vehicle,
the system will say Is connected after the
connected phone.
Deleting a Paired Phone
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say Delete . The system asks which phone to
delete followed by a tone.
4. Say the name of the phone to be deleted. If the
phone name is unknown, use the List command
for a list of all paired phones. The system responds
with Would you like to delete <phone name>?
Yes or No followed by a tone.
5. Say Yes to delete the phone. The system
responds with OK, deleting <phone name> .
4-112
g
for two seconds. The system
g
for two seconds. The system
Linking to a Different Phone
1. Press and hold
responds with Ready followed by a tone.
2. Say Bluetooth . The system responds with
Bluetooth ready followed by a tone.
3. Say Change phone . The system responds with
Please wait while I search for other phones .
If another phone is found, the response will be
<Phone name> is now connected .
If another phone is not found, the original
phone remains connected.

Storing Name Tags

The system can store up to thirty phone numbers as
name tags that are shared between the Bluetooth and
OnStar systems.
The system uses the following commands to store and
retrieve phone numbers:
Store
Digit Store
Directory
g
for two seconds. The system