Automatic Transmission Operation - GMC 2010 Yukon XL Denali Owner's Manual

Hide thumbs Also See for 2010 Yukon XL Denali:
Table of Contents

Advertisement

Automatic Transmission Operation

The vehicle has a Hydra-Matic
transmission, and has an electronic shift position
indicator within the instrument panel cluster.
The electronic shift position indicator displays when
the shift lever is moved out of P (Park).
There are several different positions for the shift lever.
Light Duty 6 Speed Automatic Transmission Shown
(Heavy Duty 6 Speed Similar)
See Range Selection Mode later in this section.
P (Park) : This position locks your rear wheels. It is the
best position to use when you start the engine because
the vehicle cannot move easily.
3-30
®
6L80 automatic
When parked on a hill, especially when the vehicle has
a heavy load, you may notice an increase in the effort
to shift out of P (Park). See Torque Lock (Automatic
Transmission) under Shifting Into Park on page 3 37
for more information.
WARNING:
It is dangerous to get out of the vehicle if the shift
lever is not fully in P (Park) with the parking brake
firmly set. The vehicle can roll.
Do not leave the vehicle when the engine is
running unless you have to. If you have left the
engine running, the vehicle can move suddenly.
You or others could be injured. To be sure the
vehicle will not move, even when you are on fairly
level ground, always set the parking brake and
move the shift lever to P (Park). See Shifting Into
Park on page 3 37. If you are pulling a trailer,
see Towing a Trailer on page 5 42.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 yukon denali

Table of Contents