Initial Drive Information - GMC 2010 Yukon XL Denali Owner's Manual

Hide thumbs Also See for 2010 Yukon XL Denali:
Table of Contents

Advertisement

Initial Drive Information

This section provides a brief overview about some of
the important features that may or may not be on your
specific vehicle.
For more detailed information, refer to each of the
features which can be found later in this owner manual.
Remote Keyless Entry (RKE) System
The RKE transmitter is used to remotely lock and
unlock the doors from up to 60 m (195 feet) away from
the vehicle.
1-4
Press
to unlock the
driver door. Press
again within five seconds
to unlock all remaining
doors.
Press
to lock all doors.
Lock and unlock feedback can be personalized.
Press
and hold to unlock the liftglass.
Press
and hold to open or close the power liftgate.
Press
and release to locate the vehicle.
Press
and hold for three seconds to sound the
panic alarm.
Press
again to cancel the panic alarm.
See Keys on page 3 3 and Remote Keyless Entry
(RKE) System Operation on page 3 4.
Remote Vehicle Start
With this feature the engine can be started from outside
of the vehicle.
Starting the Vehicle
1. Aim the RKE transmitter at the vehicle.
2. Press
.
3. Immediately after completing Step 2, press and
hold
until the turn signal lamps flash.

Advertisement

Table of Contents
loading

This manual is also suitable for:

2010 yukon denali

Table of Contents