Kenmore Front Load Washer Installation Instructions Manual page 14

Reversing Door Swing
Reattaching the door
1. Carefully pull out the 4 small round hole plugs from the
front panel and save. Move all 4 plugs to the opposite
side of the front panel and insert.
IN
2. Insert door and hinge assembly onto front panel
shoulder bolts and slide inward to center of door
opening.
OUT
MOVE
ROUND
PLUGS
3. Install the 4 hinge screws removed earlier.
4. Close the door and test operation of hinge, strike and
latch.
14
1
2
3
4