Operation Panel During Printing; Parameter Change - MUTOH Osprey 75 User Manual

6.3 OPERATION PANEL DURING PRINTING

When sending a file to your printer, following messages can be displayed.

6.3.1 Parameter change

Verify that the printer is in the following operations.
Step 1 :
•
Receiving data
•
Analysing data
•
Printing data
Press the [F3] key on the operation panel to shift to the Parameter menu.
Step 2 :
Press the [F1] key or the [F4] key in the 'Parameter' menu on the operation panel.
Step 3 :
•
The printer performs following operations:
Setup items
Parameter
Adjust the parameters of the heaters or media feed. See below for further
Step 4 :
explanation.
Parameters
Heater
Dist Adj.
–
User's Guide – Osprey 75/102/130
Descriptions
Perform following operations.
•
Checking heater temperature
•
Setting each heater temperature
Change media feed compensation value.
•
[CANCEL] key: Returns to the normal status.
107
Chapter 6: Printer menu
AP-75102, Rev. 2.0, 28/11/2007