GE Add-on Wireless Color Digital Camera User Manual page 5

Camera Placement - Built-in Tabletop Stand and/or Wall Mount
NOTE: It is recommended to complete the 'Initial Setup' procedures
for the monitor before proceeding with mounting the camera.
To simplify the mounting process, a custom wall mounting plate is
included with the mounting hardware.
1. After selecting an ideal location, use the supplied mount as a
template. Drill 3/16" holes where indicated.
2. Insert wall anchors (unless screwing directly into a stud).
3. Secure the mounting plate to the wall.
4. Disconnect AC power adapter (if connected).
5. Slide the base of the camera onto the mounting plate.
6. Connect the AC power adapter.
NIGHT LIGHT FEATURE:
The Night Light can be activated two ways:
1. Manually - Press and release the
button on top of the camera to manually
turn on or off.
2. Remotely - Press and release the button
on the right side of the monitor. The night light will illuminate on
the camera shown on the screen.
NOTE: The night light feature is not supported in quad mode
(multi-screen) view—only in single camera view.
PAIRING THE CAMERA:
1. Follow the 'Initial Setup' procedures fi rst.
2. Press and release the 'menu' button on the monitor. Using the
directional keypad, highlight the 'Pairing' option. Press and
release the 'ok' button.
3. Using the directional keypad, highlight the camera number
desired. Cameras previously assigned can be overwritten.
Press and release the 'ok' button to save.
night light