Message: Paper Misfeed: Tray 1
A paper late jam occurred during paper feed from Tray 1. The registration
Jam
sensor detected both leading and trailing edges of the paper, but the 1st
Registration sensor failed to detect the paper.
Cause:
Registration sensors failed to signal paper detection.
1st Registration sensor
Problem Site
2nd Registration sensor
CTL board
Perform check, take action in this order:
1.
Replace the inverter guide plate.
Action
2.
Replace the trailing edge sensor.
3.
Replace 1st, 2nd Registration sensors.
4.
Replace the CTL board.
Jam 10
Paper Jam from Tray 2 Between TE Sensor and Registration Sensors
Message: Paper Misfeed: Tray 2
A paper late jam occurred during paper feed from Tray 2. The registration
Jam
sensor detected both leading and trailing edges of the paper, but the 1st
Registration sensor failed to detect the paper.
Cause:
Registration sensors failed to signal paper detection.
1st Registration sensor
Problem Site
2nd Registration sensor
CTL board
Perform check, take action in this order:
1.
Replace the inverter guide plate.
Action
2.
Replace the trailing edge sensor.
3.
Replace 1st, 2nd Registration sensors.
4.
Replace the CTL board.
SM
CÓPIA NÃO CONTROLADA
4-33
CÓPIA NÃO CONTROLADA
SC Error Codes
J012/J013/J014