Polycom Hdx Quick Reference Guide - Polycom HDX 8000 Reference Manual

OTN SERVICE DESK 1-866-454-6861
Reminder – provide site name/number when contacting service desk:
Polycom HDX
Quick Reference Guide
Plug the power cable into the power
1 outlet in the wall.
Plug the network cable into the
network outlet in the wall. The network
2
cable must be plugged into the OTN-
dedicated network outlet.
Verify that the Power Bar is turned
3 On – The power supplies the whole
system – you can turn off your system
here at the end of your session.
Verify that the monitor is on
4
Verify that the codec/camera is on
by checking the switch on the front of
5
the tower or by pressing the power
button at the top of the remote control.
Place call to patient/virtual site.
Press the Directory button on the
6
remote – select entry from the Global
directory and highlight the desired
location
Press the Call button to connect to site.
Pick up the remote control.
7
Unmute your videoconferencing sound
by pressing the orange "Mute" button
located in the center of the remote
control.
14