Inserting A Module; Using Optical Disk Drives - Toshiba TECRA M5 User Manual

Operating Basics
The optical disk drive and other Slim Select Bay modules can become hot
with use. Be careful when removing the module.

Inserting a module

Insert the Slim Select Bay HDD adaptor as described below.
1. Insert the Slim Select Bay HDD adaptor in the computer as shown
below and press until the ejector clicks.
2. If you want to lock the Slim Select Bay HDD adaptor, set the Slim Select
Bay lock screw in the hole for the lock position (➁). The lock screw is
inserted in the unlock position (➀) at the time of purchasing.
Using optical disk drives
The text and illustrations in this section refer primarily to the optical disk
drive. However, operation is the same for other optical drive in the Slim
Select Bay. The full-size drive provides high-performance execution of CD/
DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used
for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows and the Slim Select Bay indicator
glows.
Use the WinDVD application to view DVD-Video discs.
If you have a DVD-ROM&CD-R/RW drive, refer also to the
DVD-ROM&CD-R/RW drive
If you have a DVD Super Multi drive, refer also to the
DVD Super Multi drive
4-12
Slim Select Bay HDD
adaptor
Figure 4-5 Inserting the Slim Select Bay HDD adaptor
section for precautions on writing to CDs/DVDs.
Lock screw
section for precautions on writing to CDs.
Writing CDs on
Writing CD/DVDs on
User's Manual