Oven Control Functions - Kenmore 790.9232 Series Use & Care Manual

Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various pad functions of the oven as described below.
STOP/CLEAR PAD-- Used to clear any function UP and DOWN ARROW PADS-- Used along with the
previously entered except the time of day and function pads to select oven temperature, cook time, CLOCK SET PAD--
Used to set the time of
minute timer. Press STOP/CLEAR to stop stop time (when programming an automatic stop time),
day.
cooking. Also the STOP/CLEAR pad is used to time of day, clean time and minute timer.
/
J
activate oven door lockout setting. \
FEATURE INDICATOR
\ LIGHTS= These light
BAKE PAD--Used to _ \ to show which feature
select the bake__ • is in use.
function. _-
BROIL PAD--
Used to select the
variable broil _ • • • _n
function. _
J • DoorLooked
SELF-CLEAN PAD--
Used to select the self-
cleaning cycle.
/
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light will glow each time the
oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when
the oven is first set to operate, or if the desired temperature is reset higher than the actual
oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and
unlocks or when using the self-clean cycle or the oven door lockout mode is activated. The
indicator light will glow constantly after the door locks.
; _ Cook COOK TIME PAD-- Used
11J ;
......... to enter the ength of the
baking time (if equipped).
V 11met Stop STOP TIME PAD-- Used
...... _ to set the desired stop
_time for baking. Can be
used with COOK TIME to
program a delayed bake
cycle (if equipped).
TIMER SET/OFF PAD-- Used to set or
cancel the minute timer. The minute timer
does not start or stop cooking. Also,
TIMER SET/OFF pad is used to set the
Continuous Bake feature.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the controls can be programmed
for silent operation. Press and hold @. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press and hold @ again for 7 seconds until the control beeps
once.
Note: The control wilt return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press _. " " appears in the display.
2. Press and hold the /_ until "HI" appears in the display.
3. Press and hold _) until °F or °C appears in the display.
4. Press the A or V to change °F to°Cor°Cto°F.
5. Press any control pad to return to normal operating mode.
11