Polycom CX5100 User Manual page 17

Polycom CX5100 Unified Communication Station User Guide
2 On your computer, start the CX5100/CX5500 Control Panel application.
The Control Panel opens and your device's system information displays in the System tab, as shown
in the next figure.
3 In the Control Panel, click Profile Editor.
The Enter Device Password dialog displays.
4 Enter the Device Password and click OK.
Note that the default device password is the system's serial number (see figure
Number Label on the Power Data Box
5 On the Network tab, enter a Device Name, select to Enable Ethernet, and choose to Enable
DHCP or Enable EAP 802.1x.
Contact your system administrator before changing the network settings for your CX5100 system.
6 On the Time tab, select your time zone.
You can also choose to enable a time server and enter the NTP Server Address.
Polycom, Inc.
for the location of the system's serial number).
Location of the Serial
15