Pride Mobility Quantum Owner's Manual page 23

I V . C O M F O R T A D J U S T M E N T S
Swing-Away Footrest (SFR) Removal
The swing-away footrests (SFR) can be moved or
removed to aid in transfers or transporting your wheel-
chair.
To move the SFR to the side:
1. Push the release lever back. See figure 21.
2. Move the SFR aside.
3. Repeat for the other side if necessary.
To remove the SFR:
1. Move the SFR to the side.
2. Pull the SFR up. See figure 22.
3. Repeat for the other side if necessary.
Swing-Away Footrest (SFR) Foot Plate Length
You can change the SFR foot plate length between
13.25-22 in. (33.66-55.88 cm) in 1-in. (2.54-cm) incre-
ments. This length is measured from the SFR foot plate
to the top of the SFR. See figure 23.
To change the SFR foot plate length:
1. Remove the screws from the SFR.
2. Adjust the foot plate to the desired length.
3. Reinstall the screws into the SFR.
4. Repeat for the other side.
Elevating Leg Rest (ELR) Foot Plate Length
You can change the ELR foot plate length between
13.25-22 in. (33.66-55.88 cm). This length is measured
from the ELR foot plate to the top of the ELR. See fig-
ure 24.
To change the ELR foot plate length:
1. Loosen the screws on the back of the ELR.
2. Adjust the foot plate to the desired length.
3. Tighten the screws on the back of the ELR.
4. Repeat the procedure for the other side.
Litestream XF
Figure 21. SFR Release
Figure 22. SFR Removal
Figure 23. SFR Foot Plate Adjustment
www.pridemobility.com
SCREWS
23