Pride Mobility Quantum Owner's Manual page 22

I V . C O M F O R T A D J U S T M E N T S
To adjust the anti-tip wheels:
1. Push the button on both sides of the anti-tip wheel
at the same time and move the anti-tip wheel up or
down to unlock it. See figure 18.
2. Adjust the anti-tip wheel to the desired position
while aligning the anti-tip wheel with the
adjustment holes.
3. Ensure that both buttons lock into place. You will
hear a click when the anti-tip wheel is locked into
place.
4. Repeat for the other side.
Seatback Angle Adjustment
Your Litestream XF may be equipped with angle-
adjustable back canes. The seatback angle can be
adjusted to 80-120° in 5° increments.
To adjust the seatback angle of the Litestream XF:
1. Remove the drive wheel. See figure 14.
2. Remove the angle adjustment screw and loosen the
depth adjustment screw. See figure 19.
3. Position the back canes at the desired angle.
4. Reinstall the angle adjustment screw and tighten
the depth adjustment screw. See figure 17.
5. Repeat on the other side of the wheelchair.
Seatback Height Adjustment
You can adjust the seatback to five different heights. The
adjustment range is 4 in. (10.16 cm) in 1-in. (2.54-cm)
increments. See figure 20.
WARNING!
equipped with a transit securement
system, the seatback height should
only be adjusted by a Quantum Rehab
Provider or a qualified technician.
To adjust the seatback height:
1. Remove the screws, nuts, and washers that fasten
the back canes to each side of the frame.
2. Slide the back canes up or down to the desired
height.
3. Use the screws, nuts, and washers to refasten the
back canes to the frame.
22
If your wheelchair
DEPTH
ADJUSTMENT
SCREW
Figure 19. Seatback Angle Adjustment
NUTS
is
Figure 20. Seatback Height Adjustment
www.pridemobility.com
BACK CANE
ANGLE
ADJUSTMENT
SCREW
WASHERS
SCREWS
FRAME
Litestream XF