ZyXEL Communications 100-NH User Manual page 98

Chapter 8 System
The following table describes the labels in this screen.
Table 30 System > Telnet
LABEL
TELNET
Port
Secure Access
Control
Secured Client IP
Address
Secured Client
MAC Address
Apply
Cancel
98
You can change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.
Select the interface(s) through which a computer may access the NWA using Telnet and
to which the IP and MAC filtering rules you specified below are applied. Otherwise, select
Disable to allow any computer to access the NWA through any interface using Telnet.
A secured client is a "trusted" computer that is allowed to communicate with the NWA
using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the MAC address that you specify to
access the NWA using this service.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
NWA1000 Series User's Guide