ZyXEL Communications 100-NH User Manual page 91

Table 27 LAN IP (continued)
LABEL
IPv6 Address
Assignment
Enable Stateful
Address Auto-
configuration
IPv6 Address/Prefix
Length
System DNS Servers
Primary DNS Server
Secondary DNS Server
VLAN Settings
802.1q VLAN
Management VLAN
ID
As Native VLAN
Green Ethernet
Energy Efficient
Ethernet (EEE)
Apply
Cancel
NWA1000 Series User's Guide
DESCRIPTION
Select this to turn on IPv6 stateful auto-configuration to have the NWA obtain an
IPv6 global address from a DHCPv6 server in your network.
Enter your IPv6 address and prefix manually.
Enter the IPv4 address of the first DNS (Domain Name Service) server, if provided.
Enter the IPv4 address of the second DNS (Domain Name Service) server address, if
provided.
Select this to enable VLAN tagging on the NWA.
Enter a number from 1 to 4094 to define the NWA's management VLAN group.
Click this check box to enable As Native VLAN. If enabled, only untagged packets
may access to the CPU of NWA. If disabled, only tagged packets shall be forwarded
to the matched VLAN. Select this check box to treat this VLAN ID as a VLAN created
on the NWA and not one assigned to it from outside the network.
Click the check box to enable Energy-Efficient Ethernet (EEE). When enabled, it turns
on power saving mode. If disabled, only tagged packets with matched VLAN-ID may
access the NWA.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
Chapter 7 LAN and VLAN
91