Table of Contents
Advertisement
Available languages
Available languages
Q
Select the pcsition that wifl place the silt supports
near the outermost point on sill (FIG. 10).
Attach the: sitl supports to the cabinet track hole
ctosest to the selected position using screw (ITEM E).
O
Place the s}i! supports with the cabinet on;the
window sill's selected position.
[]The
cabinet should be inSt_lted with a very
slight tilt (about 1!4") downward toward the outside
(FIG. tl).
Adjust the bolts end the nuts of s_ll supports to leve_
the cabinet.
_TEMB
F_G, 11
W
Attach _
cabinet to the inner sill by driving the
screws (ITEM F) through the Lower Guide i_o the
window inner sili (FIG. 12).
f
_
_-_ kow0r G uide
_TEM B
FIG. 12
_Pull
each side curtainfully to each side of
window opening,
Attach each side curtainto the windowsash using
screws (ITEM G). (FIG. 13)
_
Attach the L BRACKET
(ITEM J) with screw
(iTEM G). (F_G. _4)
FiG. 14
_
DRAINAGE
Be sure to Insert the drain pipe into base pan before
Instatlat_on.
The air conditfoner must be installed with a slight Utt
(_/4 ") downward to the outside for proper drainage of
excess condensed water t-}rough the drain pipe.
(FtG,is)
D'N_
-BASE PA'"EA"
]
_OTTOM
F'G'"
1
_
Slide the chassis into the cabinet. (F}G. 1 6)
CAUTION:
For security purposes,
reinstall side
screws you removed In step 1.
l
RG, 16
a_Out
the: foam strip {ITEM H) to the proper length
insert between t_
upper window sash and the
lower window sash. (FIG. 17}
FIG. 17
_oThe
vent control handle must be
straightened
re the decoretive front is attached.
Puli out part _ to align with part _3.
FiG. 1B
-7-
Advertisement
Table of Contents
