Compound (Miter + Bevel) Cutting - Hitachi C 12LSH Technical Data And Service Manual

Figures 14 and 15 show the right and left bevel cutting by
the Models C 12LSH and C 12RSH. More accurate miter
cutting is performed because the same reference plane
(surface of the workpiece which contacts the fence) is
used in both the left bevel cutting and the right bevel
cutting (Fig. 13). Even an oddly shaped workpiece can be
accurately bevel-cut in either left or right by making the
wide and stable surface of the workpiece as the reference
plane as shown in Fig. 16. In addition, the working
efficiency is improved because there is no need to turn
around the workpiece.

(14) Compound (miter + bevel) cutting

* These numeric values are for the models destined for the
U.S.A. and Canada. Refer to "5. SPECIFICATIONS" as the
capacities are different depending on the destinations.
Maker
Model
Max. cutting
dimensions
Left miter 45û
(Hitachi C 12FSA Right
and left miter 45û)
((C) Right and left
miter 45û)
Left bevel 45û
Height x Width
(H x W)
Right miter 31û
Left bevel 45û
Height x Width
(H x W)
Right miter 45û
((C) Right and left
miter 45û)
Right bevel 45û
Height x Width
(H x W)
Left miter 31û
Right bevel 45û
Height x Width
(H x W)
By turning the turn table to the left or right and inclining the saw blade section (head) to the left or right, the
Models C 12LSH and C 12RSH are capable of compound cutting (bevel + miter, see Figs. 17, 18 and 19) of
workpieces with the maximum dimensions shown in Table 8.
HITACHI
C 12LSH
C 12RSH
70 x 220 70 x 220
(2-3/4" x 8-5/8") (2-3/4" x 8-5/8")
75 x 180 75 x 180
(2-15/16" x 7-1/16") (2-15/16" x 7-1/16")
with aux. board width with aux. board width
25 mm (1") 25 mm (1")
70 x 265
(2-3/4" x 10-7/16")
75 x 220
(2-15/16" x 8-5/8")
with aux. board width
25 mm (1")
45 x 220
40 x 220
(1-3/4" x 8-5/8")
(1-9/16" x 8-5/8")
50 x 180
45 x 180
(1-15/16" x 7-1/16")
(1-3/4" x 7-1/16")
with aux. board width
with aux. board width
25 mm (1")
25 mm (1")
45 x 265
(1-3/4" x 10-7/16")
50 x 220
(1-15/16" x 8-5/8")
with aux. board width
25 mm (1")
Table 8
HITACHI
C 12FSA
40 x 265
(1-9/16" x 10-7/16")
45 x 220
(1-3/4" x 8-5/8")
with aux. board width
20 mm (13/16")
--- 10 ---
Fig. 16
C
55 x 220
57 x 216
(2-3/16" x 8-5/8")
(2-1/4" x 8-1/2")
69 x 162
79 x 203
(2-3/4" x 6-3/8")
(3-1/8" x 8")
with aux. board width
24 mm (15/16")
35 x 220
(1-3/8" x 8-5/8")
28 x 216
49 x 162
(1-1/8" x 8-1/2")
(1-15/16" x 6-3/8")
41 x 203
with aux. board width
(1-5/8" x 8")
24 mm (15/16")
Unit: mm (inch)
P