Replacing The Drive Panel Insert; Removing A Media Card Reader - Dell Vostro 410 Service Manual

1 drive panel insert (optional)

Replacing the Drive Panel Insert

1. Align the drive panel insert along the edges drive bay slot.
2. Push in on the drive panel insert until it locks into place.
NOTE: To comply with FCC regulations, it is recommended that you replace the drive panel insert whenever the floppy drive is removed from the
computer.
Media Card Reader
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

Removing a Media Card Reader

1. Follow the procedures in Before Working on Your
2. Remove the computer cover (see
3. Remove the bezel (see Removing the
1 screws (2)
3 USB interface cable
Computer.
Removing the Computer Cover).
Bezel).
2 Media Card Reader