Table of Contents
Advertisement
Using Air Conditioner
NOTE: If the air conditioner is turned off
or the temperature is changed to a lower
setting then back to a higher setting the
compressor will shut off. Wait 3 minutes
before the compressor will restart, this
allows
for
the
pressure inside the
compressor to equalize.. Failureto wait 3
minutes may cause inefficient operation.
When adjusting the temperature the fan
will continue to run.
To reduce the risk of fire, electric shock, or injury to persons, read
the IMPORTANTSAFETYINSTRUCTIONS before operating this appliance.
To begin operating the air conditioner, follow these steps:
1. Plug in the air conditioner. (Toprevent electricaIhazards, do not use an extension
cord or an adapter plug.)
2. Set the exhaust vent to the CLOSEDposition.
3. Press"On/Off" button to turn unit on.
4. PressFan Speed "Ht"
5. PressMode "COOL"
6. Press"TEMP/TIME" down v
to the lowest setting "60 degrees"
7. Adjust the louvers for comfortable air flow.
8. Once the room has cooled, adjust the "TEMP/I"IME" and Fan Speed to desired
temperature.
Review the "Air Conditioner Features" section for other settings.
Air Conditioner
Features
ELECTRONIC
CONTROL
OPERATING
INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel and remote
as shown below and all its functions, then follow the symbol for the functions you
ON/OF_
desire. The unit can be controlled by the touch pad alone or with the remote.
LOWERS
DISPLAYS
TEMPERATURE _
TEMPERATURE/TIME
oR'rIME
RAISES
TURNS UNIT
ON OR OFF
SETS J
SPEEDS
OR "NMES
REMOTE CONTROL
Slip battery cover off and pull the piece of plastic from between
the battery end and the connector.
PIECE
Advertisement
Table of Contents
