Panasonic KX-TG4031C Operating Instructions Manual page 39

TG403xC(e).book Page 39 Wednesday, January 13, 2010 1:44 PM
Turning VM tone detection on/off
The default setting is "On".
1
{MENU} i {#}{3}{3}{2}
2
{V}/{^}: Select the desired setting.
i {SAVE} i {OFF}
Listening to Voice Mail
messages
The unit lets you know that you have
new Voice Mail messages in the
following ways:
– "New Voice Mail" is displayed on
the handset if message indication
service is available.
– The message indicator on the handset
flashes slowly if the message alert
feature is turned on ("Message alert",
page 37).
1
{VM}
or
{MENU} i {#}{3}{3}{0}
L The speakerphone turns on.
L If there are no new messages in
the Voice Mail, {VM} is not
displayed.
2
Follow the pre-recorded
instructions.
3
When finished, press {OFF}.
Note:
L If the handset still indicates there are
new messages even after you have
listened to all new messages, turn it
off by pressing and holding {#} until
the handset beeps.
L If your Voice Mail service uses Voice
Mail tones and a message is over 3
minutes long, the handset may not
indicate new messages.
L If your Voice Mail service uses Voice
Mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
Voice Mail Service
to listen to Voice Mail messages, you
have to dial your access number
manually.
39