Chevrolet 2010 Traverse Owner's Manual page 371

Hide thumbs Also See for 2010 Traverse:
Table of Contents

Advertisement

21. Dispose of the used sealant
canister (E) and sealant/air
hose (F) assembly at a local
dealer or in accordance with
local state codes and practices.
22. Replace it with a new canister
available from your dealer.
23. After temporarily sealing a tire
using the tire sealant and
compressor kit, take the
vehicle to an authorized dealer
within a 100 miles (161 km) of
driving to have the tire repaired
or replaced.
Using the Tire Sealant and
Compressor Kit without
Sealant to Inflate a Tire (Not
Punctured)
To use the air compressor to inflate
a tire with air only and not sealant:
Vehicle Care
Always do a safety check first. See
If a Tire Goes Flat on page 10 56.
1. Remove the tire sealant and
compressor kit from its storage
location. See Storing the Tire
Sealant and Compressor Kit on
page 10 65.
2. Unwrap the air only hose (G)
and the power plug (H).
10-63

Advertisement

Table of Contents
loading

Table of Contents