Chevrolet 2010 Traverse Owner's Manual page 233

Hide thumbs Also See for 2010 Traverse:
Table of Contents

Advertisement

5. The system prompts for a name
for the phone. Use a name that
best describes the phone. This
name will be used to indicate
which phone is connected. The
system then confirms the name
provided.
6. The system responds with
<Phone name> has been
successfully paired after the
pairing process is complete.
7. Repeat Steps 1 through 7 for
additional phones to be paired.
Listing All Paired and Connected
Phones
1. Press and hold
two seconds. The system
responds with Ready followed
by a tone.
2. Say Bluetooth . The system
responds with Bluetooth ready
followed by a tone.
3. Say List . The system lists all
the paired Bluetooth devices. If a
phone is connected to the
vehicle, the system will say Is
connected after the connected
phone.
Deleting a Paired Phone
1. Press and hold
two seconds. The system
responds with Ready followed
by a tone.
2. Say Bluetooth . The system
responds with Bluetooth ready
followed by a tone.
3. Say Delete . The system asks
for
which phone to delete followed
by a tone.
4. Say the name of the phone to be
deleted. If the phone name is
unknown, use the List
command for a list of all paired
phones. The system responds
with Would you like to delete
<phone name>? Yes or No
followed by a tone.
Infotainment System
5. Say Yes to delete the phone.
The system responds with OK,
deleting <phone name> .
Linking to a Different Phone
1. Press and hold
two seconds. The system
responds with Ready followed
for
by a tone.
2. Say Bluetooth . The system
responds with Bluetooth ready
followed by a tone.
3. Say Change phone . The
system responds with Please
wait while I search for other
phones .
7-47
for
If another phone is found,
the response will be
<Phone name> is now
connected .
If another phone is not
found, the original phone
remains connected.

Advertisement

Table of Contents
loading

Table of Contents