Step 5: Selecting The Source - Sony DAV-FZ900KW Operating Instructions Manual

8
Press C/c to select [START], then
press .
The system outputs a progressive signal for
5 seconds. Check that the screen is
displayed correctly.
9
Press C/c to select [YES], then press
.
The system outputs a progressive signal.
When you select [NO], the system does not
output a progressive signal.
Step 5: Selecting the
Source
You can select the playback source.
Press FUNCTION repeatedly until the
desired function appears in the front panel
display.
Each time you press FUNCTION, the function
changes as follows.
"DVD" t "TUNER FM" t "USB" t "TV"
t "SAT/CABLE" t "DMPORT" t
"AUDIO" t ...
Function Source
"DVD" Disc that is played by the
system
"TUNER FM" FM radio (page 65)
"USB" USB device (page 71)
"TV" TV
"SAT/CABLE" Component that is
connected to the SAT/
CABLE jacks on the rear
panel
"DMPORT" DIGITAL MEDIA PORT
adapter (page 83)
"AUDIO" Portable audio source that
is connected to the AUDIO
IN jack on the front panel
FUNCTION
35
GB