Kogan KALED40XXXTB User Manual page 26

Instructions for the anti-overturning bracket:
1.The flat panel can overturn due to any external force, as shown in the following figure,
which shall be prevented.
2. It is required to install 2 brackets on the rear cover of the flat panel.
Bracket×2 Screws×2
3. Finally, the flat panel is assembled as shown in the following figure, to prevent from
overturning due to any external force.
Remarks:
1.Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.In particular,
ensure your children do not hang over or destabilize the TV; doing so may cause the
TV to tip over, causing serious injuries or death. Follow all safety precautions provided
in the user manual.
2.The flat panel can only be placed on a flat surface with a size larger than that of the
flat panel, and the supporting brackets on both sides must be located in the flat surface,
and the 2 brackets must be fixed with the screws to the left and right side of the rear
cover of the flat panel respectively.
3. The above figures are for reference only, and the physical flat panel shall govern.
4. Any issue related to safety shall be the liability of the user in case that the product is
not set up in accordance with the requirements in the instruction manual.
24