Installing The Iso Cable; Installing The Usb Cables; Basic Operations - Parrot Asteroid Smart User Manual

Hide thumbs Also See for Asteroid Smart:
Table of Contents

Advertisement

Installing the ISO cable

Connect the audio and power connectors of the Parrot ASTEROID Smart to the ones of your
vehicle.
Once the connections are made, check your installation. To do so, turn the ignition on then
off. The "Goodbye" message must be displayed. If it is not the case, it is necessary to
swap the positions of the red and yellow wires. Indeed, the red wire of the power cable
must be connected to the 12V ignition, the yellow wire to the permanent 12V and the black
wire to the ground. This can be done simply by reversing both bullet connectors located on
the Parrot wiring.

Installing the USB cables

Connect the USB cables to the Parrot ASTEROID Smart. We recommend you connect all
audio cables to the Parrot ASTEROID Smart even if you do not plan on using them. Route
the audio cables to a suitable location in your vehicle such as the glove box or arm rest
compartment. It may be necessary to drill a hole in your dashboard to do so. Avoid using
USB extension cables.
Note: Use the provided cable ties to make sure the cables are well fixed to the car stereo.
Insert one of the cable ties into the slots in the top of the back of the car stereo.
The USB cable (1.2m - 2A) to which you will connect the USB / iPod cable extension must
be connected to its specific white USB port. "iPod" is written above it.
To guarantee an optimal reception quality we recommend you do not connect your USB
Modem on the Parrot ASTEROID Smart directly : use the USB cable to install your device on
the dashboard (or any other open area).

Basic operations

The Parrot ASTEROID Smart faceplate can be removed to protect your unit from theft. The
Parrot ASTEROID Smart cannot work without its faceplate.
Handle the faceplate with care. Do not force while installing or removing it. Keep it away
from sunlight, humidity or high temperatures.
To remove the faceplate, hold down the button on the top left and slide it downwards.
Installation
13

Advertisement

Table of Contents
loading

Table of Contents