Connecting The Parking Brake Lead - Parrot Asteroid Smart User Manual

Hide thumbs Also See for Asteroid Smart:

Table of Contents

The GPS receiver antenna is located on the side where "Parrot ASTEROID GPS" is

written and where the star-shaped logo is. This logo must always be directed

towards the sky.

If your vehicle has an athermic windshield, stick the GPS receiver on the windshield on the

non athermic area. The side where the star-shaped logo is must be stuck on the

windshield.

Note : The non athermic area of the windshield depends on the model of your vehicle. It is

usually located near the rear view mirror.

If your vehicle does not have an athermic windshield, stick the GPS receiver on the

dashboard. The side where the star-shaped logo is must be visible.

To make sure the adhesive tape adheres well :

use the provided adhesive tape ;

clean the area with an appropriate cleaning product before sticking the support ;

once you have stuck the support on the dashboard, wait for approximately 2 hours

without handling it.

Note: Once the GPS receiver is connected to the Parrot ASTEROID Smart, the GPS receiver

light becomes white while searching for a GPS signal. The light blinks as soon as a signal is

detected. Select Settings > Location & security > Activate the external GPS LED to activate/

deactivate the light.

Connecting the parking brake lead

The parking brake lead allows you to use the Parrot ASTEROID Smart video function or

applications only when the parking brake is set. If this cable is not connected to your

vehicle parking brake system, the video function will not be available.

Installation

Table of Contents