Ipod; Usb Storage Device; Sd Card - Parrot Asteroid Smart User Manual

slide your finger to the left to get back to the previous track.
Note : If you are using the Parrot ASTEROID Smart with an audio player connected via
Bluetooth, these commands are only available if your audio player supports the AVRCP
profile (Audio/Video Remote Control Profile).

iPod

Note : If you are using the Parrot ASTEROID with the iPod Mini, iPod Photo, iPod 3G and
iPod Shuffle, then connect your iPod to the Parrot ASTEROID using the Jack / Jack cable.
1. Connect the USB / iPod extension lead to the USB cable connected to the white USB
port and connect your iPod to it.
2. Tap Music and select iPod. You can also tap
your iPod.
3. Tap a track to start playback.
Note : Tap to adjust several settings (audio, repeat, random).

USB storage device

Note : Make sure your storage device is formatted for FAT32 to use it with the Parrot
ASTEROID Smart.
The Parrot ASTEROID Smart is compatible with the majority of USB keys / MP3 audio player
/ external hard drive. There is no restriction in terms of capacity of USB keys. Only MP3,
AAC or WMA formats are supported.
1. Connect your USB storage device to the Parrot ASTEROID Smart using the USB cable or
the USB connectors on the back of the car stereo
2. Tap Music and select USB. You can also tap
your USB device.
3. Tap a track to start playback.
Note : Tap to adjust several settings (audio, repeat, random).

SD card

Note : Make sure your SD card is formatted for FAT32 to use it with the Parrot ASTEROID
Smart. Do not format the SD card provided with the Parrot ASTEROID Smart, as the iGo
navigation datas are stored on it.
The SD card capacity must not exceed 32Gb. Only MP3, AAC, WAV, OGG or WMA formats
are supported.
Note : To remove the SD card, put a fingernail into the ridge on the exposed end of the SD
card.
Browse to browse through the content of
Browse to browse through the content of
Music 23