Table of Contents
Advertisement
to begin rotation. Call preset 33 to enable PTZ 180 degrees rotation. Call preset 34 to set
dome position as 0.
Set preset: Set preset 26 or 92 to set scan left limit. Set preset 27 or 93 to set scan right
limit. Set preset 22 or 79 to begin record. Set preset 23 or 80 to stop record.
4.4.4.2 Pan
Move the cursor to PAN button and then click confirm button to go to setup interface.
PAN SPEED: Set dome rotation speed. The Value ranges from 1 to 255. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
RUN: Move the cursor to call item and then click confirm button. The dome begins 360
degrees continuous rotation.
STOP: Highlight stop item and then click confirm button. The dome stops rotation.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.4.4.3 Scan
Move the cursor to SCAN button and then click confirm button.
SCAN NO：Here is to set auto scan number. The value ranges from 1 to 5. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
SET LEFT LIMIT：Here is to set camera left address. Click confirm button to save current
setup.
SET RIGHT LIMIT：Here is to set camera right address. Click confirm button to save current
setup.
SCAN SPEED: The value ranges from 1 to 255. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
RUN: Please input auto scan number first, and then please move the cursor to RUN and
click confirm button to activate auto scan function.
STOP: Here is to terminate auto scan function.
BACK: Go back to previous menu.
EXIT: Log out system menu.
4.4.4.4 Cruise (Touring)
PAN SPEED
：160
RUN
STOP
BACK
EXIT
SCAN NO ： 001
SET LEFT LIMIT
SET RIGHT LIMIT
SCAN SPEED ：160
RUN
STOP
BACK
EXIT
28
Advertisement
Table of Contents
